05-10-2012 09:58 AM
...and macro promrammed keys not responding (tested in notepad not working).
W7/64 bit, UAC is disabled, latest logitech driver, also the same issue with the legacy driver.
05-10-2012 01:48 PM
Do you happen to have an x58 based motherboard? A lot of people have issues with this platform. I also did, until I started plugging my G110 into the eSata 3.0 slots (eSata 3.0 uses USB connections). I'm not 100% sure why it works, but it seems like the G110 draws more power than the USB hub can handle when using other higher powered devices on the same USB hub.
05-11-2012 08:32 AM
Until I put half my periferals on the USB ports and the other half on the eSata 3.0 ports, I had an issue. That said, before I found a solution, I found I could use the G13 along with an old school keyboard without a problem, but I could not use the G110 and the G13 together until I found the above solution.
05-11-2012 01:30 PM - edited 05-11-2012 02:13 PM
I tried using a powered usb hub for g110 and no joy.
On a separate note, to your knowledge will the G13 work on a regular usb port with an x58?
(Logitech, please dispense with the posting captha, it is most onerous, so onerous in fact it is suffiecient cause to move to Razer products..)
11-29-2012 07:42 AM
you should be able to download them from this site by clicking on "Support" at the top of the page, and following the prompts. you may have to use a different browser if you have a 64-bit operating system but your browser only lets you choose the 32-bit drivers.
I do not work for Logitech. I'm just a user.