06-14-2009 01:26 PM
To answer your last question better I have now changed the DVD activity to use another input channel. I set it to ext4. The result is: This does not work either. The 1100 does not change input channels!
To be exact: It works ONE time after the remote has been restarted (by removing battery of through update). After that it won't send any change signals anymore, wether when turning on an activity from All Off, nor when changing from one activity to another.
06-14-2009 02:06 PM - edited 06-14-2009 02:12 PM
OK - Thanks.
So what are the entries for Input names in Method 1, in addition to Ext2 and Ext4?
And while the Activities won't change from Ext2 to Ext4 or from Ext4 to Ext2, you can achieve the change with the appropriate number of InputNext commands sent from Devices?
06-14-2009 03:23 PM
Thanks for the info and thanks for your patience.
What can be done in Devices ought to be possible in Activities and we've run through all the possibilities that we can here, so it's time to report the details to Logitech support so that they can have a look into the inner workings of the Activities and check out what is going wrong down there.
06-15-2009 05:06 AM
Okay I can take care of this on Tuesday.
Can you test the following for me.
Many European TV's have the ability to use Method 1 or Method 3.
Please test the following.
For a minimum of 2 seconds hold the "Input" command while your TV is on for at least 20 seconds.
Please confirm if holding the input command brings up the Input menu.
PLease PM me with your account login information.
06-16-2009 03:24 AM
> Please confirm if holding the input command brings up the Input menu.
Nope. It does change the input channel one time and that's it. No menu, no consecutive changes when pressing for a few seconds.