Harmony Remotes - Programming

[jvanhorn]

Good afternoon.

I am having problems setting up the input method for my TV.

Attached is a picture of my TV remote for reference.

I have the TV inputs setup for only the following:

TV (cannot be disabled)

Component 1 (Wii)

HDMI1 (Receiver)

All other inputs are disabled on the TV.

All other inputs are disabled.

I cannot find a method that works accurately.

Is there a reference page to see what the correct setting for this TV is, or does someone happen to know.

Thank you for your help.

Jon

[rhachey]

Use Input method 2, on the next page reduce the list of inputs to the 3 that you listed, then on the next page assign the correct command for each input.

[jvanhorn · Accepted solution]

Thanks for the reply.

I think i found the answer though.

I tried option two using your info, but it kept getting stuck when it would cycly through the end. Panasonic made the menu go away once you got to the end of the input list.

Option 3 works for me. I chose TV Video for the first button, Channel Down for the second button, and Select for the third button.

Jon

[rhachey]

With Method 2 there should be no cycling as it uses discrete commands that go directly to the input