Harmony Remotes

[Gtech101]

So I am trying to control 2 Dishnetwork Reciever with logitech harmony 1100 My VIP 922 works fine but the 2nd receiver is on Remote address 2 and it is not working How do I change the harmony to point to remote address 2 ? . I cannot change that vip 722 to 1 becuase then it will also control vip922 at same time both reciever are in equipment closet with Remote extender so both at same address is a issue so  I need to change one of the remote address in logitech harmony 1100 How should I do that

[triad]

Add a second Dish device. When it asks if you have the original remote, answer yes and confirm a few IR commands using the Dish remote that's set to address 2. If that doesn't do it, you'll have learn all commands from the address 2 remote. Alternately, you can import the pronto hex for address 2. That's the most complicated option, but I can post the codes and procedures if you want to pursue it.

Realize that your second Dish DVR must be set to IR address 2 and that you can't learn any commands from the 922 remote, only the 722 remote, and the 722 remote must be in IR mode.

Confirm IR method should work because I've been told the harmony database includes at least addresses 1-16, with addresses 17-32 to be added soon.

[Gtech101]

Wow, Thank you so much it works like a charm, Just one more question how do I setup DVR button on the harmony 1100 ? I have the dvr button on orignal remote but its not coming under harmony 1100

[triad · Accepted solution]

List = DVR

[Gtech101]

Got it thanks a lot