Harmony Remotes

[SalsaCycle]

My Epson 8350 projector does not turn off when it is being used with my Motorola VIP2262 PVR as the source, although it will turn off when the activity is watching a DVD (Sony S350 Blu-Ray as source). I'm using the Harmony 890 remote with wireless extender.

The device is set up as per the FAQ on this subject, i.e., two Power Toggle commands are sent when the system is supposed to power down.

The system will power down if I subsequently use the Help function, but I need to do this every time.

The troubleshooting procedure for this problem suggests changing the Inter-Device Delay from its default value of 500 ms. I have tried values ranging from 200 ms to 1500 ms without success.

I notice that the default Power On delay for this device is 30,000 ms. Can this be right?

Any insight on how to find a solution to this problem would be much appreciated.

[RonNova]

Hi SalsaCycle, 

If you are only experiencing these problem on Watch TV, it is possible that there's a problem on the activity itself. 

Try to Delete and Re-add the Activity Manually. 

Regards, 

Ron 

[rhachey]

Most Projectors require 2 power off commands to be sent to power it off.  Go to Devices, Your Projector, Settings, Adjust Power