Harmony Remotes

[jasham]

I have a programming question?

I've tried to set up my Harmoney One to turn on my new Samsung TV, Turn on my Denon

AVR-1612 receiver, change the input on my TV from HDMI2 to Component to operate my Wii, then when I turn off my Wii to set the TV back to HDMI2.

The Harmoney turns on everthing correctly, but will NOT change the input from HDMI 2 to Component or back again.

Any ideas on how to fix this one?

[Ahorodny]

This is for 2 different activities correct?

I would reccomend going into device mode for your TV and testing out any commands that say input infront of them to see if they change the inputs at all. We may just need to adjust the input selecting method.. a simple fix!

[jasham]

No One activity, but multiple commands. When the command to  change input from HDMI2 to Component does not work, I can do it manually by selecting devices/tv/input component, then that will work. And doing the reverse will work, but not from within the activity set of commands.

For the Activity set as Wii, I have turn on TV, set input to Component, turn on AVR, set input to TV. The remote turns on the TV, keeps it at HDMI2 and turns on the AVR and sets it to TV. I turn on the Wii as the remote is not able to do so.

[Ahorodny]

ok will help ever fix the issue and make it change inputs? is this from a cold start up or inbetween activities?

[jasham]

From either a cold start or changing activities. I've not tried help, I have it turned off in my settings.

[Ahorodny]

you cant turn help off, there is a button that says help on it below your LCD screen press that, It will ask you some questions and check to make sure it changes the input. You probally have to change your Inter device delay and your power on delay by the sounds of it

[jasham]

Ok, I'll try that and see then drop a note on here. I've tried adding a delay, in part of the startup process, but that did not work. I'll try the help function to see what happens.

[jasham]

Help function did NOT work. How would you suggest  I program delays into the activity?

[Ahorodny]

This should fox your issue, test to see what input commands take you where on your TV. Make a list

Harmony                                            TV goes to

Input HDMI 1                                       HDMI 1

Input HDMI 2                                        HDMI 2

Input Component                                AV

Input AV                                                   Component

That is just an example they all may be in the correct spots but just test them all and make sure they are going in the right place, Once you know where they are all going use the second half of this link and it shows you how to adjust the command assoicated with the inputs

http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/11925/kw/inputs

[jasham]

Ok, I'll give that a rewiew and see.

I do have set up working successfully 4 other activites, but they all are associated with HDMI2 or just my AVR tuner i.e. listening to music.  None of them invlove changing inputs on the TV.