Harmony Remotes

[mitrepooc]

Hi,

Try as i might i cannot get the harmony to switch video inputs when i set an activity, there is no problem if i press the help button or assign a hard button.

I've tried the delays to no avail.

The panels remote has hard buttons for each video input.

The panel model is Fujitsu P42VHA30ES

[rhachey]

There are two delays that will effect the problem that your are having, since the Help button corrects the problem. First if you are missing the input when starting from an all off state, you need to increase the Power On delay for the TV, if you are missing the input when switching between activities you need to increase the Inter-device delay for the TV.  Both of these delays are done on the remote, start by  holding the Help button for 5 seconds to get to the advanced settings area, select your TV, then select whatever delay you need to change.

[mitrepooc]

Hello i've tried all the delays as well as the input methods all to no avail.

[mitrepooc]

No worries gone back to my trusty Pronto........