Harmony Remotes

[Beno2]

Hi

Can someone please help with a setup issue.

Problem 1: I have everything as i need it apart from when i select an activity i need it to turn on my devices, plus put it onto the correct viewing/listning channel.As it stands now it only remebers the last channel it was on. Eg if i was watching TV and then i choose to listen to a music activity through the same source i need it to go to a music channel of my choice and not select the TV channel i last watched.

Problem 2: I have Denon AVR which has 2 room options,How do i setup my remote/or create activity to turn on both zones and listen to the same sound source.

hope this sound clear (Iam a newbbie)

Beno2

[rhachey · Accepted solution]

In reguards to Problem 2, to control Zone 2, you have to add the AVR a second time to your Acccount, when you put in the model number, add (Zone 2) to the end of the model number.

[Beno2]

Hi

Thanks for that info works a treat.Problem 2 solved.

Just need problem 1 solved now.If it helps everything is fine when i click on my activity i just want to be able to select the correct channel to watch at the same time

[Beno2]

Hi

Problem 1 solved but one more issue if someone can help.

When i select channel number to start to  0111 the remote does not seem to be sending the "0" insteaf it put it on channel 111

Any help would be great

Beno2

[rhachey]

On my DirecTV DVR if you typed channel 0111, it would go to channel 111 as they are both the same.

[Beno2]

Hi

If i type 0111 i get a radio station but if i input 111 i get a tv station.So ithink the issue is with the zero.

If i use the original remote it works for 0111. It seems the remote does not out the "0" in a action

Beno2

[rhachey]

There is an option in the setup as to how your device goes to a channel.  Select Devices, Your Device, Settings, Advanced Setup for this device, then you will have to go through several screens until you get to "How Do You Select Channels with your original remote?"  You can try "Number(s) then enter (or Select)", or "Number(s) Only", and see if either of those work for you.

[Beno2]

thanks for that i will give it a go

Beno2