Harmony Remotes

[MRWaynesWorld]

I have been trying to get a Harmony One remote to work in our living room for the past couple of days. The main problem I have been having is selecting a different activity either from one activity or from a complete shut down of my equipment.

I don't have anything outlandish here pretty simple, TV - Samsung LN52A750R, Sourround System - JVC TH-F3 and a Media PC.

Now selecting Watch TV all is OK. But if I select watch a Movie the TV will not switch over to HDMI1. I've tried all different angles to get it to switch, even used the help system on the remote it work but for only that one time. Even if I'm say watch TV and select watch a movie the TV stays on TV and does not switch to HDMI. If I'm on Watch a Movie and select Watch TV the TV will not switch to TV.

Can some please give me some assistance with my issue....

Thanks in Advance...

[rhachey]

If you are having a problem going to the correct input when switching between activities, you need to increase the Inter-device delay for the device you are having a problem switching inputs

[MRWaynesWorld]

Thanks I'll give that a try on Monday night. Busy with work all day tomorrow and of course Monday...

[Ahorodny]

also test to see if the commands work in device mode you may have to change the input switching method, how would you do it with the original remote?

[MRWaynesWorld]

With the original remotes I would select the HDMI1 input source on the TV with the TV remote, then swith to the MCE Remote to make my selection.

[Ahorodny]

Test the commands input commands in device mode for the TV, if they work try your activities and use help to see if they change. If help does not fix the issue then there is no point in adjusting the Iinter device delay... you may have to change your input switching method