Harmony Remotes

[fbiancol]

Hi there,

I recently purchased an Antec Fusion remote case and built a PC, installed Win7, iMon software etc.

The Antec remote works fine...quick to respond, quick to repeat (e.g. going down a long list)

I programmed my Harmony 650 to control this case, but many of the stock commands were not working, so I used the LEARN feature to enable many of the commands, including the UP/DOWN/LEFT/RIGHT PAD commands that my antec remote uses.

The commands work, but there is a horribly long delay between responses (e.g. 1 second or more).  When scrolling through a long list of media, this is impossible.  I've set the interkey delay to 0, and even adjusted the repeats setting and tried both 5 and 0.  No change.

Not sure how to resolve this...because as it stands, the interface from the remote is WAY too slow to be useful.  Woudl really appreciate some help!

Thanks!

Fabio

[odruard]

Hello,

I have exactly the same problem with my Harmony One.

Let me know if you find a solution or a workaround.

Olivier

[odruard]

I just found a workaround :

- Configur iMon to work with a MediaCenter remote control : select “MCE remote” in iMON Manager>Settings>Remote Controller

- Add a new device in your Harmony configuraton : choose "Computer / Media center PC" type then search for a MCE remote, and the software will suggest you a "Microsoft  MCE-2006".

It work better than the Antec emulation.

Problem is that I need to find associations between all Antec functions and all MCE functions.

Enjoy !

Olivier