Reply
Logi Visitor
kleineMax
Posts: 21
Registered: ‎08-17-2009

Alternative way for recalibrating Driving Force GT?

[ Edited ]

Hi,

 

if got a question about the kalibration that normaly happens when you plug in the wheel via USB. Is there an other way to start the calibration without repluging the USB?

Becaus at the moment the wheel is plugt to the back of the PC and i would leave it that way but when ever the wheel misses to calibrate or is just to much off center i have to look at the back of the PC an it is build in a desk.

 

So any other way?

 

Greets

kleineMax

Logi Apprentice
dz302
Posts: 179
Registered: ‎09-02-2010

Re: Alternative way for recalibrating Driving Force GT?

Try unplugging and replugging in the power supply to the wheel.

Logi Visitor
kleineMax
Posts: 21
Registered: ‎08-17-2009

Re: Alternative way for recalibrating Driving Force GT?

Nope, that just turns on end off the motors and doesnt recalibrate the wheel. And that unplugging the AC is the way i often come to the need of recalibration.

 

Cause sometimes i play and then pause for bit, do other stuff, and detach the wheel from my desk -> so unplug AC and pedals. When i need it again i plug the AC back in and now the wheel is centered wrong.

No Big deal if you have pluged the USB of the wheel in front but if it is on the back -.-