Reply
Logi Nu
Sainare
Posts: 1
Registered: ‎09-11-2012

Attack 3 Joystick problem...

Hello, I've been having a bit of problem with my Attack 3 Joystick for quite some time now; been looking all over the internet for solutions but to no avail. 

 

The problem I encountered was through Battlefield 3. While on foot or vehicles, I would be forced to continuously look left. I have checked the profiler of the joystick, and without me even touching the joystick, the handle position is shown as +67%, +45%. In other words, the red crosshair is to the left rather than the centre of the box shown in the profiler. I can still touch the edges when moving the joystick, all the buttons respond properly. So this explains what happened with BF3, but I have no idea how to fix this. 

Is there any way I can fix this?

 

Thanks in advance.

Support Specialist ★★★★
daleLogi
Posts: 5,987
Registered: ‎01-06-2010

Re: Attack 3 Joystick problem...

[ Edited ]

Hello Sainare,

 

You can try the following steps to resolve the issue:

-Unplug then re-plug the Logitech Attack 3 Joystick.

-Calibrate the Logitech Attack 3 Joystick:

 

In Windows XP:

 

-Go to Control Panel.

-Select Game Controllers.

- Hold down the CTRL and SHIFT keys at the same time then click  on Properties.

-Go to the Test tab first and test the controls on the Logitech Attack 3 Joystick

-Then go to the Settings tab.

-Click  "Calibrate" and follow the on-screen instructions.

 

In Windows Vista/7

 

-Go to Control Panel.

-Select Devices and Printers

-Right click the Logitech Attack 3 Joystick

-Click Game Controller Settings

-Press CTRL+SHIFT+ Left click on Properties.

-Go to the Settings tab.

-Click Calibrate.

 

Hope this helps.

 

daleLogi

Support Specialist

      
Support Home Page | Downloads | Contact Support | Manuals | Warranty | Check Rebate Status
If a reply adequately addresses your technical issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
All opinions written here are my own and do not necessarily reflect the views and opinions of my employer.

 

Logi Nu
eddynigma
Posts: 1
Registered: ‎10-19-2013

Re: Attack 3 Joystick problem...

I've got the same problem and calibrating it does nothing. Throttle goes from 0 to 81% and the X axis (left to right movement I believe) will only go halfway to the right from center. It will not go completely to the right. I've used a couple of calibration tools and they both come up with the same problem. The Logitech calibration tool shows that the throttle is used intermittently even though I am not touching it.

 

This type of problem seems to plague this joystick as I am seeing quite a few posts on the internet with people having the same type of issue. How can this be fixed?