Mice and Pointing Devices

[Blama]

Hi,

I've got the following problem:

I bought a M505 from Amazon, it arrived yesterday. I plugged the unifying receiver in, everything worked without the need to install anything.

Then this evening from one moment to the other the mouse stopped working. I switched USB ports (both build in in my IBM laptop) for the receiver and it helped (it also showed something like "new hardware found and ready to use"). A few minutes later it stopped working again. I again switched USB ports, which didn't help.

Then I got the SetPoint software (v4.80.103) with drivers v4.82.11 from the homepage.

Afterwards I rebooted, which didn't change anything.

When I looked into the unifying receivers configuration I saw it paried with one device. I unpaired and tried to re-pair, which didn't work.

So it is not working right now. When I switch the mouse off-on nothing happens, when I remove and re-insert batteries the light on top of the mouse is flashing for less than a second.I also tries this while the PC was waiting for off-on fro mthe mouse to re-pair. It just does not do it.

Do you have any ideas how to re-pair the mouse? I really don't like working with the touchpad!

Thanks in advance,

Blama

[Blama]

Here the contents of Unifying Report.txt:

Logitech® Unifying Software Version : 1.00.127
Dj Api Version : 1, 0, 127

Empfänger
Name : Unifying-Empfänger
ModelId : 0x46dc52b
Serial Number : 049393B9
Handle : 0xff000001
Wireless Status : 0x3
Firmware version : 012.000.00017
Bootloader version : BL.000.012
Dfu Status : 0x1
Is Dfu Cancellable : Yes
Max Device Capacity : 6


[19:16:37:0055]: ----------[09-06-2009]------------------------- Unifying API ------------------------------------

[19:16:37:0055]: Unifying Loaded DLL: 1.0.127

[19:18:08:0616]: DJ_DisconnectDevice( 0x1000002, Unpairing Wireless Device : Wireless Device Model ID = 0x3101d , Wireless Device Serial No = 101D-89-F7-EE-C8  ).

[19:18:08:0756]: Device [M505/B605 - 101D-89-F7-EE-C8] successfully unpaired.

[19:20:13:0704]: -------------------------------------------------------------------------------------------------

[19:20:57:0515]: ----------[09-06-2009]------------------------- Unifying API ------------------------------------

[19:20:57:0515]: Unifying Loaded DLL: 1.0.127

[19:21:35:0006]: -------------------------------------------------------------------------------------------------

[19:28:34:0859]: ----------[09-06-2009]------------------------- Unifying API ------------------------------------

[19:28:34:0880]: Unifying Loaded DLL: 1.0.127

Log content displays the 100% of the available one.
 

[Blama]

This morning the re-pair it worked again, as if nothing happend.

Also, the mouse was switched off during the night.

Strange behavior. Will keep you updated on this.

[Blama]

The errors kept showing up once in a while. Sometimes removing the batteries helped, sometimes it didn't.

It was most likly a short-circuit in the mouse.

Exchanged it for an M705, which works nice so far.