07-10-2010 10:12 AM
I am having trouble programming my Harmony 300 to work with my Eviant T7 tv. During setup the default commands I see are:
These default commands work properly on my tv. However, the default list does not have the power on/off nor the number buttons, which are quite important to me. I tried teaching the commands, assigning the power and number buttons to the appropriate keys on the harmony, and resynced the harmony. When I press the Power button I see the devices button light up but my T7 does not turn on/off. The number keys don't work either.
Does anyone know what I can do to get this to work? Or does the T7 remote do something unusual that will not work with the harmony?
07-12-2010 05:11 AM
Based on the guide, I can't see a Power button or numbers on the original remote.
Either way, you should have no problems if you do learn from another remote. As long as you drag & drop those newly learned commands onto the buttons first & then Sync all should work.
Most people learn in 1, 2, 3 etc but don't drag them over to the number buttons and may assume that they're working by default.
Let us know if you still have issues
07-14-2010 07:41 PM - edited 07-14-2010 07:43 PM
The T7 remote does have a power button as well as number commands (as well as a - button for digital channels). I think the instructions must be showing an older model.
I had dragged the learned power command to the power button, as well as the learned number commands over the number buttons. The settings are assigned to the keys, and I have synced the remote.
When I press the power button on the remote, I notice that the device button glows on for about 2 seconds, so I assume the command is trying to be sent out.