MyHarmony.com

[doppler]

Hi,

I am having trouble programming my Harmony 300 to work with my Eviant T7 tv. During setup the default commands I see are:

ChannelUp
ChannelDown
DirectionDown
DirectionLeft
DirectionRight
DirectionUp
Menu
VolumeUp
VolumeDown

These default commands work properly on my tv. However, the default list does not have the power on/off nor the number buttons, which are quite important to me. I tried teaching the commands, assigning the power and number buttons to the appropriate keys on the harmony, and resynced the harmony. When I press the Power button I see the devices button light up but my T7 does not turn on/off. The number keys don't work either.

Does anyone know what I can do to get this to work? Or does the T7 remote do something unusual that will not work with the harmony?

[DaneHarmony]

Hi Doppler,

Based on the guide, I can't see a Power button or numbers on the original remote. 

http://www.eviant.com/frontend1/pdf/T7-Quick-Start-Guide.pdf

Either way, you should have no problems if you do learn from another remote.  As long as you drag & drop those newly learned commands onto the buttons first & then Sync all should work.

Most people learn in 1, 2, 3 etc but don't drag them over to the number buttons and may assume that they're working by default.

Let us know if you still have issues

Dane

[doppler]

The T7 remote does have a power button as well as number commands (as well as a - button for digital channels).  I think the instructions must be showing an older model.

I had dragged the learned power command to the power button, as well as the learned number commands over the number buttons.  The settings are assigned to the keys, and I have synced the remote.

When I press the power button on the remote, I notice that the device button glows on for about 2 seconds, so I assume the command is trying to be sent out.