04-25-2012 10:29 PM
I have a Marantz SR4000 AV amp that is one of the devices configured on my 650 remote. With the actual Marantz remote, the buttons need to be held down for about 1/2 second in order for the amp to respond to power-on or power-off, and I can manually power the amp on or off with the 650 remote by selecting the SR4000 in Devices and holding the appropriate button down for the 1/2 second. However, although the amp is configured to power on for both the Watch TV and Watch Movie activities, doesn't power on when I select either activity, nor does it power off when I press All Off.
The amp is powered on by pressing the InputDVD button, and powered off by pressing the PowerToggle button, so I need to up the repeat count or duration for both these commands, but can't see how to do this through the My Harmony interface.
04-26-2012 06:34 AM
If you are using the MyHarmony.com site to program your remote, you need to contact Harmony support to change the repeats. This setting is only available if you use the 7.7 software, which would require you to create a new account and program your remote over from scratch.
05-19-2012 02:53 PM
Just purchased 650. Everything programmed fine with one annoying problem. I have a LG BP220 Blue Ray
Player. I watch Netflix, and Vudu movies via the player. When I go to the buttons to make a selection
the up , down, left, and right move in increments to two. This is absolutely annoying as it won't stop on
what I want. Please tell me how to correct. I used the myharmony software to program. Thank you
05-21-2012 07:46 AM
I used the 7.7 software and that solved the problem. Thanks !
One other ? if you don't mind. Can the 650 learn commands from the LG magic remote. I tried without success.