03-14-2012 07:52 PM
Hi all, I have a Harmony 900 remote and an LG 47LV4400-UA TV. The input on my LG is set by pressing the input button, it brings up a band on the bottom with all of my inputs, when you press the input button again it cycles to the next input until you reach the input you want, at that point doing nothing selects that input that you stopped on.
I have set up my activities but when I choose the activity the input on the TV dosent seem to change correctly, it always ends up short.
For example when I choose watch TV the remote should set the TV to HDMI1 and my receiver to Video1, it seems to miss on setting the correct input on the TV, sometimes stopping 3 short, othertimes 2 short and sometimes 1 short.. If I use the help I can set it to the correct channel, however occasionaly it will give me an RF error message and tells me to point my remote at my TV again. I have attempted to set the timer for the delays but have had no luck.
03-14-2012 09:16 PM
Think I found a solution, its ugly but it works
If anyone else is having issues with the Harmony and an LG TV
03-15-2012 10:53 AM
Go to "troubleshoot" on you 7.7 software then choose "my tv does not go to correct input" (sounds like that)
On the next page, choose the first option says: "I use 1 button to choose from the menu and cycles through it (meaning you press only 1 button e.g. "Input" then you press it again to switch from the options)
Next, you'll see another window that shows list of inputs. You may either delete 1 input on the list or use your original remote then take a look at the list of inputs, then check your software if you have those inputs also (list from first to last must match)
You may also delete and re-add the TV on your software in order to correct or get the default list of inputs.