Reply
Logi Nu
roblangston
Posts: 2
Registered: ‎06-12-2013

Logitech Touch

I currently have a watch tv activity set up which turns the following devices on:- Samsung TV, Yamaha Soundbar, Sky HD box. What I need to do is add a delay at the end of the power on commands of roughly 2 seconds and then switch the soundbar input to HDMI 2. Currently when I customise the task I can add the delay but InputHDMI2 is not listed in the available commands of the soundbar. Is this a software restriction? It seems like the old windows based software had far more flexibility.
Support Specialist ★
Spellbound
Posts: 940
Registered: ‎09-19-2012

Re: Logitech Touch

Hello roblangston,

Have you added the device as an amplifier and what model number did you use for this Yamaha soundbar?

Spellbound
Support Specialist

If a reply adequately addresses your technical issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.

Logitech

Support Home Page | Downloads | Contact Support | Manuals | Warranty | Check Rebate Status
All opinions written here are my own and do not necessarily reflect the views and opinions of my employer.

Logi Nu
roblangston
Posts: 2
Registered: ‎06-12-2013

Re: Logitech Touch

Hi, The TV is a Samsung 46ES8000 and the sound bar is a Yamaha YSP-3300. If I select the sound bar individually as a device from the remote control I can access all of the HDMI inputs. It seems that only when trying to customise a task containing the soundbar, the ability to switch hdmi sources is missing from the devices command list. Thanks, Rob