MyHarmony.com

[JBarthel]

MyHarmony.com does not correctly setup the device. Power is on "4", Channel 2 on Channel-Up, Channel 8 on Volume-Down, etc. pp.
Without a working remote (that is the device the new remote was supposed to replace the remote for, it is rather useless. It would be nice to have a "test mode" where commands are being sent to the TV and can then be assigned to the proper keys.

Anyone having an idea how to set up this remote correctly?

Current "settings" (Butten = Function):

4 = Power
Vol-Down = 8
Ch-Up = 2
Grün = Teletext
Vol-Up = Teletext groß/klein
Return = Channel-Up
2 = Down
5 = Vol-Up
8 = 4
Enter = 3
Power = TV-Mode

[JBarthel]

Please close. I was able to "recover" the information from the broken original remote. Though it took me hours and hours until the Harmony recognized the commands properly. It would have been nice to save it to the proper ID "150TO 02W" (as it says on the device), but I did not find any solution to add the device "by hand" - it always gives me the existing (incorrectly configured) one.

As a result, my review in Amazon is rather negative. It is a nice device IF it works / WHEN it works, but the automatic setup does not work for this TV, neither for the LG 32LG7000, neither for the DUNE-IPTV-receiver nor the CD-Radio. All setup automatically, all working incorrectly and having required manual update. Once I find time, I will "teach" the remote each and every one of my original remotes... Right now it replaces just the one remote and just "backs up" the others...