10-02-2011 03:32 PM - edited 10-02-2011 04:11 PM
I just set up my new TV and updated my 890 for it. My Mitsubishi WD-92840 has four HDMI inputs, but the remote itself lacks buttons to directly switch to the desired input, only a button to bring up a selector menu which I them have to use the left/right arrows and OK button to select.
The Harmony set-up program provided direct switch codes for all HDMI inputs, but only the codes for HDMI1, HDMI2 and HDMI4 work. The HDMI3 code does not work at all (i.e. not even occassionalyy).
Also, it appears that the remote is using the power toggle to control the on/off state of the TV, even though the TV has discrete codes and the discrete codes show up in the device button listing.
Any thoughts on how to address this or get Logitech to fix the issues?
10-02-2011 11:22 PM
To fix the problem of not using the correct power commands, go to Device, Your TV, Setting, Adjust Power, select I want to turn off this device when not in use, One button for On and another for Off, then for Power On select I don't have the original remote but I know whet the command is, from the drop down list of commands select PowerOn, on the next page for Power Off do the same and select the PowerOff command
03-23-2012 06:45 PM
I just bought the Mitsubishi WD-73740 and have the same issue with the HDMI 3.
The code is wrong for the HDMI 3, all the other input functions work how they should.
Hope they come up with a fix soon!