04-11-2012 12:25 PM
I just pluged in my red momo to use it, after having not in a while. windows 7 64 bit had done some updates. Now the lights don't come on and I get no ffb. I did reboot to see if that would help. All else seems to be fine. ( running LFS). When I go to my device manager, I show two out of three of my HID data filters have a caution code 52. all three shoe KB 911895.
Could this my problem? Does any one have any other thoughts as to what may be happening here?
Solved! Go to Solution.
04-12-2012 12:10 PM - edited 04-12-2012 01:24 PM
Please try removing the Red Momo Wheel and the Logitech Gaming Software. Reinstall in clean boot mode: http://logitech-en-amr.custhelp.com/app/answers/de
Logitech Gaming Software:
You could also try the following:
You must be logged on as an administrator to perform these steps.
1.Open Device Manager by clicking the Start button , clicking Control Panel, clicking System and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
2.In Device Manager, locate the device you want to update, and then double-click the device name.
3.Click the Driver tab.(Driver Provider should show Logitech)
4.Click update driver
5.Choose Browse my computer
6.Choose let me pick from list
7.Choose the Logitech driver
At this point you may be asked to reboot the system .
04-12-2012 02:32 PM
Thanks for taking the time to help.
I have taken all the steps you have provided above, to no avail.
I have now lost some sensativity in my wheel turn. the wheel only responds at the extreme points right or left. I have no steering response in the middle.
The driver version is 18.104.22.168
04-12-2012 05:06 PM
I went back and reloaded everytihing including the progarm from my wingman disc.
I followed your instructions once again. This time all is working well once again.
To does that can't get there red momo FBB to work in windows 7 64 bit. I am proof it can be done. Good luck to all.
04-13-2012 07:08 AM
Thank you for posting the update. If you click accept solution, it will be easier for people to find that may have the same issue.