06-09-2007 04:18 PM
I was wondering if I can find out what is the correct Product Number for Logitech® QuickCall™ USB Speakerphone ???
I just purchased one from Fry's with P/N 980440-1403, but the rebate form they gave me requested P/N 980440-0403.
I am wondering if 980440-0403 does in fact exist or is it a typo on the form? The rebate goes to Dept. 90737.
Thanks for any information.
06-09-2007 05:40 PM
Welcome to the Logitech Community Discussion Forums Unknown!
The Product Information page for this device lists P/N: 980440-1403 (I'd post the direct link, but the forum will not allow this at present. ).
The -xxxx is *usually* the country code.
I would contact Fry's to make sure there isn't a typo on their form...just to be safe.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
Have you checked your Logitech Forums Private Messages today?
If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<
In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.
* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.
New to Webcams? START HERE!
Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 126.96.36.1998 / 188.8.131.520 / 184.108.40.2069 / 220.127.116.115 / 18.104.22.1683 - Issues and Solutions
Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS