05-08-2012 10:53 AM
Guys I have no clue what has caused this, but this is the problem I am facing
(a) The Revue worked perfectly since yesterday
(b) Today on switching on, the boot logo appears bur after that "no signal" message on the TV comes and the revue never comes on
Have tried the following:-
(a) change HDMI cable and TV - Still the same observation as described earlier
(b) Did a hard reset to restore factory settings by keeping the connect button depressed , plugging the power with the connect button still pressed followed by holding the button for almost 90 secs to do a factory reset. However, even this fails and I have been unsuccessful in booting up the box.
BTW I'm on android 3.1, provided as an OTA update by Logitech itself.
Any help in this regard is solicited and would be much appreciated . Thanks once again
05-08-2012 11:21 AM
I had a similar issue, I thought it odd that you get the Logitech splash screen but then no signal? I had to press the reset button on the back a few times and it eventually came back.
Another issue I had loosing the picture was when I moved the box because I think the Hdmi socket may be loose on my unit, if I waggle the hdmi lead it comes back eventually.
05-08-2012 12:20 PM
You were right, it is indeed an issue with the HDMI socket, wiggling it does get the picture back on (goes away if the socket is even slightly disturbed) but there is still no sound, guess i have a ruined box, anu suggestions with regards to repairs if possible