05-02-2012 05:02 PM
i have a z5450 5.1 system and i have the turtle beach audio advantage micro 2 which supports S/PDIF so i connected all the speakers(left, right, center) and plugged in the wireless rear speakers and then i connected my optical cable to the z5450 and then also on the turtle beach micro 2 but only left, right and the sub is the only speakers that are working. center and rear speakers are not how can i make those other speakers work? turtle beach supports 5.1 and 7.1 systems so i'm sure that it can make it work maybe i'm just missing some configurations or something.
07-13-2012 04:15 PM
- Enable sound card's digital output ( sound card's software ).
- Have the correct input on the control pod of speakers ( Digital S/PDIF optical connection ).
- Try an IPOD or MP3 player on the 3.5 mm audio port on the side of the control pod and check if you get the same results
- Reconnect the rear speakers by pressing the reset pinholes on the speakers system. Refer to the manual for reconnecting the rear speakers.
Support Home Page | Downloads | Contact Support | Manuals | Warranty | Check Rebate Status
If a reply adequately addresses your technical issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
All opinions written here are my own and do not necessarily reflect the views and opinions of my employer.