Reply
Logi Nu
vertigo7096
Posts: 2
Registered: ‎03-09-2012
0

Want to rig my 5.1 surrond speakers to out put 2.1 sound over all 5 speakers

I am assuming there is some sort of driver that would be capable of doing this, my system currently runs on Realtek HD audio drivers.

 

Does anyone know of any drivers that can make the 3 extra speakers (center, rear right and left) simply repeat the sound that it being sent to the 2 main speakers and the sub?

 

I figure this would have to be done with drivers because there are three seperate plugs for the different speakers (Green, black and orange)

 

any help is apprciated! thanks

Logi Nu
portugeeza
Posts: 4
Registered: ‎03-08-2012
0

Re: Want to rig my 5.1 surrond speakers to out put 2.1 sound over all 5 speakers

hi vertigo7096

 

In the Realtek HD audio magager make sure you have speaker fill ticked that should make all the speakers have sound

could you please tell me how you have your speakers set up as it might help with my problem

Retired Logitech Employee / Moderator (Inactive)
dhelpard1
Posts: 654
Registered: ‎03-03-2011
0

Re: Want to rig my 5.1 surrond speakers to out put 2.1 sound over all 5 speakers

Hello vertigo7096,

 

Depending on your speakers, you may be able to simply enable matrix mode, select Stereo X2 as an effect, or simply unplug all cables with the exception of the green jack and the speakers will simulate surround sound.  This will vary depending on what set of speakers you currently have.  What speaker set do you currently have?

 

Sincerely,

Knowledgebase | Downloads + Get Parts | Contact Support | Manuals | Warranty | Rebate
If a reply adequately addresses your technical issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.