Video capture with Skype

PBE · ‎01-22-2009

I am new to the webcam experience but teach online and have what may be a silly question: Is it possible to capture a Skype conversation with QuickCam Pro 9000 as a video file for use later, and if so, how (or where are there directions on how to go about it)? I need to interview some experts in the field of my course (with their entire consent) for transmission at a later time to online students.

PBE

KachiWachi · ‎05-22-2006

Welcome to the Logitech Community Webcam Forum PBE!

In order to perform this task, third-party software will be required.

Thanks.

(Note - Recording a conversation without the expressed permission of the other party *may* violate your state and/or local laws. Please make sure that you have permission to record any and all conversations before doing so. Thanks.)

KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)

(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)

Have you checked your Logitech Forums Private Messages today?

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS

PBE · ‎01-22-2009

Got it, and I followed the "third party software" link -- but is there any way to tell which of these would do the trick with a Skype feed, or are any of the ones listed that advertise themselves as enabling video capture equally able to handle that particular task?

KachiWachi · ‎05-22-2006

PBE asks -

is there any way to tell which of these would do the trick with a Skype feed, or are any of the ones listed that advertise themselves as enabling video capture equally able to handle that particular task?

Please contact the third-party software vendor directly for assistance with this issue.

Thanks.

KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)

(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)

Have you checked your Logitech Forums Private Messages today?

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS

hahaa · ‎08-19-2009

hi

I record video and audio Skype with SkypeCap....I like

SirjeJ · ‎11-12-2009

I recommend you to record video conversations with SkypeCap (it was mentioned above), this tool works for both Windows and Mac OS. Alternatively you can simply use any sreen recorder, VidScreenShot (Wind), Macvide ScreenCap (Mac), etc.

VallySko · ‎04-20-2010

Try IMCapture for Skype. It records audio and video conversations in different formats and in a high quality.

hahaa · ‎08-19-2009

mmm...agree, IMCapture for Skype nice tool too, im using this prog now

MiaR · ‎05-20-2010

I tried IMCapture... It's really good! I like it.

Video Chat Applications (Non-Logitech)

Video capture with Skype

Re: Video capture with Skype

Re: Video capture with Skype

Re: Video capture with Skype

Re: Video capture with Skype

Re: Video capture with Skype

Re: Video capture with Skype

Re: Video capture with Skype

Re: Video capture with Skype