KachiWachi
Distinguished Logi Legend
Posts: 46,473
Topics: 242
Kudos: 1,000
Solutions: 456
Registered:
05-22-2006
Welcome to the Logitech Community Webcam Forum geoffames! 
Since you are looking for "unsupported OS" information (i.e.: Linux), please visit the QuickCam® Team website. If you sign up, please put a link in your new post that references your initial posting here (and vice versa).
Thanks.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
Have you checked your Logitech Forums Private Messages today?
If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<
In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.
* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.
* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.
New to Webcams? START HERE!
Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions
Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Since you are looking for "unsupported OS" information (i.e.: Linux), please visit the QuickCam® Team website. If you sign up, please put a link in your new post that references your initial posting here (and vice versa).
Thanks.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
Have you checked your Logitech Forums Private Messages today? If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<
In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.
* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.
* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.
New to Webcams? START HERE!
Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions
Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
