10-21-2008 11:03 AM - last edited on 10-22-2008 10:03 AM by Pegasus
We use the Quickcam Pro for Notebooks in our business (PN 960-000045). There is a clip on the back of the camera that attaches to the camera. There is a VERY TINY screw that attaches the clip to a post on the back of the camera. I have been unable to determine the dimensions of that screw (size, pitch, whether it's metric or SAE thread). We have created an adapter that is rigid and I need to know the dimensions of the original screw so that I can order/buy slightly longer screws to attach the camera to the adapter. I'm hoping someone out there will know the screw dimensions. If so, please post those dimensions. Thanks for any assistance you may be able to offer.
11-16-2008 08:52 AM
Please contact Logitech Support directly for further assistance with this issue.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
Have you checked your Logitech Forums Private Messages today?
If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<
In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.
* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.
New to Webcams? START HERE!
Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 184.108.40.2068 / 220.127.116.110 / 18.104.22.1689 / 22.214.171.1245 / 126.96.36.1993 - Issues and Solutions
Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS