Webcams

Reply
Topic Options
kostarev_vadim
Logi Browser
kostarev_vadim
Posts: 6
Registered: ‎02-25-2012
0

C300 320x240 (QVGA) Error

[ Edited ]
Options

‎02-25-2012 02:15 PM - last edited on ‎03-20-2012 05:57 PM by

I have same problem? but my processor intel 

  G33M-S2     Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz     Award Modular BIOS v6.00PG     NVIDIA GeForce GTX 560 Ti     5,00 GB

Report Inappropriate Content
Message 1 of 12 (457 Views)
 
Reply
KachiWachi
Posts: 46,460
Topics: 242
Kudos: 1,000
Solutions: 456
Registered: ‎05-22-2006
0

Re: C300 320x240 (QVGA) Error

Options

‎02-26-2012 05:00 AM

Welcome to the Logitech Community Webcam Forum kostarev_vadim! :smileyhappy:


What is the make/model of your PC and/or motherboard?



Thanks.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Report Inappropriate Content
Message 2 of 12 (435 Views)
 
Reply
kostarev_vadim
Logi Browser
kostarev_vadim
Posts: 6
Registered: ‎02-25-2012
0

Re: C300 320x240 (QVGA) Error

Options

‎03-02-2012 02:25 AM

Gigabyte Technology Co., Ltd. model  G33M-S2

Award Modular BIOS v6.00PG version F4 date 07.09.2007

Report Inappropriate Content
Message 3 of 12 (418 Views)
 
Reply
KachiWachi
Posts: 46,460
Topics: 242
Kudos: 1,000
Solutions: 456
Registered: ‎05-22-2006
0

Re: C300 320x240 (QVGA) Error

Options

‎03-02-2012 05:00 AM

Which version of the Logitech Webcam Software application/drivers is installed?



Thanks.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Report Inappropriate Content
Message 4 of 12 (415 Views)
 
Reply
kostarev_vadim
Logi Browser
kostarev_vadim
Posts: 6
Registered: ‎02-25-2012
0

Re: C300 320x240 (QVGA) Error

Options

‎03-14-2012 11:38 PM

Logitech webcam Software 2.31   driver 13.31.1044

Report Inappropriate Content
Message 5 of 12 (425 Views)
 
Reply
KachiWachi
Posts: 46,460
Topics: 242
Kudos: 1,000
Solutions: 456
Registered: ‎05-22-2006
0

Re: C300 320x240 (QVGA) Error

Options

‎03-15-2012 05:00 AM

What Operating System (OS) and Service Pack (SP) version is installed?



Thanks.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Report Inappropriate Content
Message 6 of 12 (417 Views)
 
Reply
kostarev_vadim
Logi Browser
kostarev_vadim
Posts: 6
Registered: ‎02-25-2012
0

Re: C300 320x240 (QVGA) Error

Options

‎03-15-2012 06:55 AM

Windows 7 x64 

Report Inappropriate Content
Message 7 of 12 (411 Views)
 
Reply
KachiWachi
Posts: 46,460
Topics: 242
Kudos: 1,000
Solutions: 456
Registered: ‎05-22-2006
0

Re: C300 320x240 (QVGA) Error

Options

‎03-16-2012 05:00 AM

1) Is the camera being plugged directly into the PC's USB port?

2) Are any other USB devices currently installed/attached to your PC?



Thanks.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Report Inappropriate Content
Message 8 of 12 (356 Views)
 
Reply
kostarev_vadim
Logi Browser
kostarev_vadim
Posts: 6
Registered: ‎02-25-2012
0

Re: C300 320x240 (QVGA) Error

Options

‎03-17-2012 05:08 AM

I tried different options. I vidklyuchav almost all devices except the mouse (mice trieddifferent manufacturers) and keyboard (PS / 2). Also pidklyuchav webcam in variousports, including the very motherboard controller in USB 3.0, the front panel as well.
Also want to say that the cause is understood only to realize unable.
Windows 7 installs its driver from the official site,And even if I turn off the automatic Windows 7 drivers still install drivers that have beenloaded before. I also delete dravera Manager of devices and once I almost lucky cameraworked well but after rebooting from the Windows 7 drivers were installing floor Logitechcamera again and started to work in a 320 * 240 only.

Then as I tried to install Logitech QuickCam (2.31.1044.0c) during installation program offers to connect the camera to the PC recognized correctly, but when checking the camera again works in 320 * 240 only. (Options with automatic installation and manualinstallation were tried)

Report Inappropriate Content
Message 9 of 12 (348 Views)
 
Reply
KachiWachi
Posts: 46,460
Topics: 242
Kudos: 1,000
Solutions: 456
Registered: ‎05-22-2006

Re: C300 320x240 (QVGA) Error

Options

‎03-18-2012 05:00 AM

Does this issue occur when the camera is installed on another PC?



Thanks.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Report Inappropriate Content
Message 10 of 12 (330 Views)
 
Reply