Reply
Logi Nu
dweller569
Posts: 3
Registered: ‎04-01-2012
0
Accepted Solution

C525 mic not working Windows 7 64 bit

I cannot get a new C525 webcam mic to function. I have tried both the Logitech and USB audio drivers, but the mic is still dead.  The mic is recognized in the Windows Recording Devices window and it is flagged as the "default communications device".   Also, there is no VU meter icon to the right of the mic entry.  The Realtec analog mic connection is set as the "Default Device".

 

The analog mic works just fine.  I can see the Properties of the mic, but the "Levels" tab is empty.  Also, it lets me change the icon for the mic, but is won't save any changed icon.

 

I have tried the mic with Sound recorder and it is dead.  I did a "clean install" as described in this forum but still no change.  Another hint is the Skype microphone test call fails with the message "can not access your audio card".  Also, I have tried to use Logitech USB headsets and have never been able to get  them to work either.

 

I am running the latest versions of the Logitech drives / software.  I am running WIndows 7 64 bit with Realtech HD Audio software that came with the MB.  I also have a Hauppauge Win TV HVR-1600 TV tuner installed - don't know if that is pertinent.

 

Thanks for any help on this frustrating experience.

Retired Logitech Employee / Moderator (Inactive)
CarterW
Posts: 698
Registered: ‎08-30-2010
0

Re: C525 mic not working Windows 7 64 bit

Hi dweller569,

 

It sounds to me like the mic is defective, would it be possible to test the camera on a second computer for the same problem? You don't have to install the software, just let the Windows drivers install and test the microphone in Recording Devices. If it has the same problem that would confirm it as a hardware defect, in which case the next step would be to return it or contact customer care in your region for a warranty replacement.


Regards

Knowledgebase | Downloads + Get Parts | Contact Support | Manuals | Warranty | Rebate
If a reply adequately addresses your technical issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Logi Nu
dweller569
Posts: 3
Registered: ‎04-01-2012
0

Re: C525 mic not working Windows 7 64 bit

I wish that you were right, but the webcam works just fine on my Lenovo Win 7 64 bit laptop.

 

By the way, I did check and the audio inf files are all in my Windows/INF folder.

KachiWachi
Posts: 46,556
Topics: 242
Kudos: 1,008
Solutions: 463
Registered: ‎05-22-2006
0

Re: C525 mic not working Windows 7 64 bit

Welcome to the Logitech Community Webcam Forum dweller569! :smileyhappy:


Please provide a copy of the setupapi.dev.log for evaluation... per the specific instructions mentioned.



Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Nu
dweller569
Posts: 3
Registered: ‎04-01-2012
0

Re: C525 mic not working Windows 7 64 bit

The problem was fixed by doing a 14-hour Windows 7 Repair.  Stressful, but effective.  This issue is closed.

KachiWachi
Posts: 46,556
Topics: 242
Kudos: 1,008
Solutions: 463
Registered: ‎05-22-2006
0

Re: C525 mic not working Windows 7 64 bit


dweller569 sez -

The problem was fixed by doing a 14-hour Windows 7 Repair.



OK.



Thank you for reporting back in with your progress and updated status.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Nu
Toti
Posts: 1
Registered: ‎04-24-2012
0

Re: C525 mic not working Windows 7 64 bit

@dweller569

 

I have the same problem can you let me know what you did ?

Ive been trying to get a fix on this for 2 days already and tried alot of the stuff that i found in search but no hope.

 

 

KachiWachi
Posts: 46,556
Topics: 242
Kudos: 1,008
Solutions: 463
Registered: ‎05-22-2006
0

Re: C525 mic not working Windows 7 64 bit

Welcome to the Logitech Community Webcam Forum Toti! :smileyhappy:


Toti asks -

I have the same problem can you let me know what you did ?



http://windows.microsoft.com/en-us/windows7/What-are-the-system-recovery-options-in-Windows-7



Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS