08-18-2012 03:36 PM
I just bought a brand new Logitech HD Pro Webcam C920 and installed all the correct software. BUT when I go to "Quick Capture" to change the settings on "Advanced Settings" under "Image orientation" where it says Normal & Mirrored the "Mirrored" button is disabled and won't let me click it.
I've tried uninstalling the drivers and software with the camera unplugged then re-installing the drivers and software to try again but I still get the same problem.
Please someone help me, I love this camera but I absolutely need the "Mirrored" option to work in order to film my tutorials!
08-22-2012 01:36 PM - edited 08-22-2012 02:08 PM
Responding to say I have the same problem. Don't want this thread getting ignored until some kind of official response is given. How can a flagship web cam have this option disabled?
08-22-2012 03:38 PM
I have an update!
I'm not sure if this is intentional or a bug but this is what I found out: The mirror functionality only becomes ungreyed when you switch to "Video" mode using either "Small: 320p" or "Medium 480p." You can't control it in the higher resolutions and if you switch to a higher resoultion it turns off but going back down to the previous lower resolutions will turn it back on automagically.
In "Photo" mode mirroring is greyed out no matter what resolution you choose BUT if you enable it while in "Video" mode mirroring will stay on in "Photo" mode no matter what resolution you choose.
Hopefully this is just a oversight/bug as I imagine you probably want to film your tutorials in HD using 720p.
08-26-2012 05:00 AM
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
Have you checked your Logitech Forums Private Messages today?
If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<
In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.
* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.
New to Webcams? START HERE!
Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 22.214.171.1248 / 126.96.36.1990 / 188.8.131.529 / 184.108.40.2065 / 220.127.116.113 - Issues and Solutions
Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS