Webcams

Reply
Topic Options
Laserbear
Logi Nu
Laserbear
Posts: 2
Registered: ‎05-31-2012
0
Accepted Solution

Enable Raw-mode on Logitech C 300 Webcam

[ Edited ]
Options

‎05-31-2012 08:43 AM - edited ‎05-31-2012 11:37 PM

Hi guys,

 

I would like to readout the raw-data from my Logitech C300 webcam. It seems as if this issue is not new and I already found a link in the Logitech forum:

 

 

http://www.quickcamteam.net/documentation/how-to/how-to-enable-raw-streaming-on-logitech-webcams

 

But, unfortunately this website is not working any more.

 

Can anyone provide me with the proper software? Or does anyone know if and when the qickcamteam - site will go online again?

 

Best regards. 

Report Inappropriate Content
Message 1 of 3 (571 Views)
 
Reply
Laserbear
Logi Nu
Laserbear
Posts: 2
Registered: ‎05-31-2012
0

Re: Enable Raw-mode on Logitech C 300 Webcam

Options

‎06-01-2012 02:01 AM

Dear all,

 

in the meanwhile I was sucessfull!

 

Many thanks to Alen M who posted this:

01-31-2012 07:47 PM

Ok, so the site has lost life support, but has anyone managed to salvage some of the documentation off of the quickcamteam.net site? If you happen to have anything, do you mind posting it up for retrieval?

 

If you are looking for the Bayer source code, you'll be able to download it from...

 

http://mesh.brown.edu/byo3d/source.html

 

It's included in the Structured Light scanner. The direct link is...

 

http://mesh.brown.edu/byo3d/source/structured%20li​ght/cvStructuredLight.zip

 

I followed the second link and used the bayer.exe under Windows XP.

 

Best regards.

Report Inappropriate Content
Message 2 of 3 (555 Views)
 
Reply
KachiWachi
Posts: 46,460
Topics: 242
Kudos: 1,000
Solutions: 456
Registered: ‎05-22-2006
0

Re: Enable Raw-mode on Logitech C 300 Webcam

Options

‎06-01-2012 05:00 AM

Welcome to the Logitech Community Webcam Forum Laserbear! :smileyhappy:

Earlier in this thread, Laserbear asks -

Can anyone provide me with the proper software?


http://web.archive.org/web/20100830135714/http://www.quickcamteam.net/documentation/how-to/how-to-en...



Thanks.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Report Inappropriate Content
Message 3 of 3 (539 Views)
 
Reply