Re: Fusion webcam problem with drivers (all of them, 10.5 = crashes, 11.0 and 11.5 = Driver problem)

KachiWachi · ‎05-22-2006

Please try reinstalling the Logitech Webcam Software "clean".

Thanks.

KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)

(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)

Have you checked your Logitech Forums Private Messages today?

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS

BowlesPCRepair · ‎06-06-2009

Have you tried plugging in the cam (UVC mode) into another computer? Also what other USB audio devices do you have, if any? How are you plugging in the cam, through a hub or directly into the port?

skiphulme · ‎07-01-2009

I have to say that I am very reluctant to mess with this any further for the time being since the basic video and audio functions are now working. I need this to communicate with someone via Skype. I will try a "clean" install of the software once the immediate need has passed.

Thanks again,

Skip

KachiWachi · ‎05-22-2006

OK.

Please report back in with your progress and updated status when you can.

Thanks.

KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)

(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)

Have you checked your Logitech Forums Private Messages today?

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS