KachiWachi
Distinguished Logi Legend
Posts: 46,464
Topics: 242
Kudos: 1,000
Solutions: 456
Registered:
05-22-2006
Welcome to the Logitech Community Webcam Forum CosmoKram3r! 
Looks like a Messenger to me...
You can try QuickCam 8.4.8, which can be found here.
Please report back if this works for you.
Thanks.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
Have you checked your Logitech Forums Private Messages today? If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<
In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.
* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.
* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.
New to Webcams? START HERE!
Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions
Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
CosmoKram3r wrote:
Hey everyone, i bought my webcam and then i let my friend borrowed it and now ive got it back i cant remember the model number and i lost the driver disc.. it doesnt have the name of it written on it so i have no clue what drivers i should install... does anyone know how i can find out?
Hi CosmoKram3r,
As suggested by Kachi, it's seems like you have QC Messenger. You can also find the model of your webcam and also the software version by accessing FAQ#3427 & FAQ#3428. All the software for the webcam are available in our download site.
Regards,
Mal
Mal
KachiWachi
Distinguished Logi Legend
Posts: 46,464
Topics: 242
Kudos: 1,000
Solutions: 456
Registered:
05-22-2006
Mal -
There was no tag (check his photos), so the FAQ wouldn't help in this case. 
I'd ask him for the USB\VID ID, but plugging in the camera without any software is a no-no so...
Hopefully QuickCam 8.4.8 will get him going...we'll see.
Thanks.
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
Have you checked your Logitech Forums Private Messages today? If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<
In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.
* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.
* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.
New to Webcams? START HERE!
Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions
Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
