Reply
Logi Browser
Unknown1001
Posts: 8
Registered: ‎11-10-2007

Logitech V-UH9 webcam

[ Edited ]
Hello,
I have the Logitech V-UH9 webcam but unfortunately lost the installation CD for it. So i really need to download the software needed to install the webcam. Can I download the software from anywhere? If i can, then could you please provide me with a link to the webpage or something from where I can download. Can you please let me know.
 
Thanks a lot.


Message Edited by Unknown1001 on 11-10-2007 02:48 PM
KachiWachi
Posts: 48,149
Topics: 251
Kudos: 1,294
Solutions: 505
Registered: ‎05-22-2006
Country: United States

Re: Logitech V-UH9 webcam

Welcome to the Logitech Community Webcam Forum Unknown1001! :smileyhappy:

I'm hoping that you will read my personal welcome thread as we progress. Thank you.
 
 
Check the third "floated" post from the top.
 
Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., RightNow® Technologies, Inc., or Salesforce.com, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing LIMITED "general" troubleshooting assistance in the public forums at this time.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Browser
Unknown1001
Posts: 8
Registered: ‎11-10-2007

Re: Logitech V-UH9 webcam

I am really sorry but what did you mean by the third "floated" post?
KachiWachi
Posts: 48,149
Topics: 251
Kudos: 1,294
Solutions: 505
Registered: ‎05-22-2006
Country: United States

Re: Logitech V-UH9 webcam

Each forum is divided into two sections.
 
"Floated" posts (grey background) remain fixed at the top of the forum for easy reference.
 
"Normal" posts (white background) change location as new posts are added.
 
Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., RightNow® Technologies, Inc., or Salesforce.com, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing LIMITED "general" troubleshooting assistance in the public forums at this time.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Browser
Unknown1001
Posts: 8
Registered: ‎11-10-2007

Re: Logitech V-UH9 webcam

[ Edited ]
Could you please tell me where to go after i enter the FTP site? I can't seem to find any drivers or softwares for the V-UH9 version. I tried downloading the file that is inside the .developer section but after i downloaded it, it does not install, it just stops after all the files are extracted. Your help is greatly appreciated, please tell me what to do or where to find the file that i need to install the V-UH9 webcam.
Thank you. 


Message Edited by Unknown1001 on 11-10-2007 03:15 PM
KachiWachi
Posts: 48,149
Topics: 251
Kudos: 1,294
Solutions: 505
Registered: ‎05-22-2006
Country: United States

Re: Logitech V-UH9 webcam

OS?
 
Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., RightNow® Technologies, Inc., or Salesforce.com, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing LIMITED "general" troubleshooting assistance in the public forums at this time.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Browser
Unknown1001
Posts: 8
Registered: ‎11-10-2007

Re: Logitech V-UH9 webcam

Really sorry but what did you mean by your last post, I am not really used to the forum language.
KachiWachi
Posts: 48,149
Topics: 251
Kudos: 1,294
Solutions: 505
Registered: ‎05-22-2006
Country: United States

Re: Logitech V-UH9 webcam

OS = Operating System
 
Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., RightNow® Technologies, Inc., or Salesforce.com, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing LIMITED "general" troubleshooting assistance in the public forums at this time.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Browser
Unknown1001
Posts: 8
Registered: ‎11-10-2007

Re: Logitech V-UH9 webcam

[ Edited ]
Oh ok, my operating system is Windows XP professional.
 
EDIT: Really sorry for the last 3 posts, i accidentally pushed the button to post and 3 messages got posted. Really sorry.


Message Edited by Unknown1001 on 11-10-2007 03:26 PM
KachiWachi
Posts: 48,149
Topics: 251
Kudos: 1,294
Solutions: 505
Registered: ‎05-22-2006
Country: United States

Re: Logitech V-UH9 webcam

P/N: 861078
M/N: V-UH9
USB\VID_046D&PID_0870 ; Express (new ASIC)
QuickCam 6.0.1, ImageStudio 7.3.0, and QuickCam 8.4.8
 
 
You can use any of the software versions mentioned above.
 
This camera is also native to WinXP (ovcam.inf)...so technically, no drivers need to be installed.
 
Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., RightNow® Technologies, Inc., or Salesforce.com, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing LIMITED "general" troubleshooting assistance in the public forums at this time.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS