New Software Dropped Feature

xiaolang · ‎08-07-2010

Before I downloaded the new software, I had my camera set to flip the picture vertically. (Upside-down) This was because the only way I could get the camera hooked onto something by my home computer. Now that I have downloaded the new software, I can not find this option anymore. Is it just me, and if not, how can I get it to flip once more? My camera info is here:

USB Vender ID (VID): 0X046D
USB Product ID (PID): 0X0802
USB Revision (BCD): 0X0009
Firmware version: 5.0.1158
Firmware CRC: 0X0230
EEPROM Version: 2.144
Sensor Type: 2.3

Driver Version: 13.0.1783.0

KachiWachi · ‎05-22-2006

Welcome to the Logitech Community Webcam Forum xiaolang!

Please contact the Logitech Streaming Media Systems Group Business Office directly for further assistance with this issue.

Thanks.

KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)

(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)

Have you checked your Logitech Forums Private Messages today?

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS

Shwizz · ‎12-07-2010

Same problem here!

What's the benefit of dropping that feature altogether?

KachiWachi · ‎05-22-2006

Welcome to the Logitech Community Webcam Forum Shwizz!

http://forums.logitech.com/t5/Webcams/Logitech-Webcam-Software-2-00-1783-2-01-1025-2-10-1224-Issues/...

Thanks.

(Ref: Other Reported Issues)

KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)

(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)

Have you checked your Logitech Forums Private Messages today?

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS

Webcams

New Software Dropped Feature

Re: New Software Dropped Feature

Re: New Software Dropped Feature

Re: New Software Dropped Feature