04-27-2012 07:54 AM
Hi everyone. My girlfriend got recently the C170 logitech webcam, and she has been using for a few weeks a conceptronic USB Wifi adapter (exactly : conceptronic 150N wireless usb adapter 5dbi model c150uand) wich had worked fine till yesterday.
When she plugged the webcam,her OS ( windows 7 64 bit ) automatly got it and installed new drivers, downloading for logitech webpage. And everything seemed cool. But after install the new drivers, she noticed that her wifi adapter didnt get any wifi line. The adapter stopped and it was like it wasnt connected to the PC. She rebooted the PC and the problem was still there. She had to unplug webcam and adapter, plug again adapter, and then the adapter was recognized by windows again. Then, she plugged again the webcam and she could make a videocall (gtalk and skype, both operating ok), but in less than 10 minutes the call was losing quality and the pc started to lose conection till dead. And again the adapter wasnt be able for windows. She had to unplug and plug both items again. And the problem persists, before 2-3 minutes of been conected to internet, with the webcam ON, but not being used the conection dies.
Today she has been troubled to get conection all the day till she unnistall all the webcam drivers. I figure that the webcam drivers are not compatible or have any problem with conceptronic adapter drivers. So I ask for any solution for this problem, something we (she) can do for solve it, cause she preffer not to get the webcam back to the store, cause she liked it.
04-28-2012 05:00 AM
What is the make/model of your girlfriend's PC?
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
Have you checked your Logitech Forums Private Messages today?
If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<
In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.
* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.
New to Webcams? START HERE!
Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 220.127.116.118 / 18.104.22.1680 / 22.214.171.1249 / 126.96.36.1995 / 188.8.131.523 - Issues and Solutions
Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS