03-29-2012 11:31 AM - last edited on 03-30-2012 05:21 PM by AntonC
I hop this is not to off topic. I have a QuickCam® Communicate Deluxe™ (S7500) and I use NI IMAQ for LabView National Instrument.
I can change the exposure time manualy but not the focus do you know if I can change the focus manualy using LabView or how can I do it ?
I would also need to know if there is one off the cameras with manuel focus and manual exposure control wich can go up too 60fps or higher with a resolution of 640x480 or higher.
04-06-2012 05:00 AM
For the QuickCam® Communicate Deluxe (S7500):
- Focus Type = Manual Focus Wheel located on the right side of camera (Adjustable)
KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
Have you checked your Logitech Forums Private Messages today?
If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<
In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.
* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.
New to Webcams? START HERE!
Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 188.8.131.528 / 184.108.40.2060 / 220.127.116.119 / 18.104.22.1685 / 22.214.171.1243 - Issues and Solutions
Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS