Reply
Logi Browser
G9Fan
Posts: 16
Registered: ‎02-28-2009

Quickcam software problem Vista x64 Ultimate

Everytime I reboot my computer keeps crashing i.e. It keeps coming up with a window that states that Quickcam.exe has stopped working

 

The details that it comes up with is as follows:

 

Problem signature:
  Problem Event Name: APPCRASH
  Application Name: Quickcam.exe
  Application Version: 11.80.1065.0
  Application Timestamp: 48a4c8bb
  Fault Module Name: Quickcam.exe
  Fault Module Version: 11.80.1065.0
  Fault Module Timestamp: 48a4c8bb
  Exception Code: c00000fd
  Exception Offset: 000a1494
  OS Version: 6.0.6001.2.1.0.256.1
  Locale ID: 2057
  Additional Information 1: fd00
  Additional Information 2: ea6f5fe8924aaa756324d57f87834160
  Additional Information 3: fd00
  Additional Information 4: ea6f5fe8924aaa756324d57f87834160

Read our privacy statement:
  http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
 

 

I have the x64 version of the software that was installed when I upgraded from the 32-bit software. Where it worked fine.

 

The drivers are fine, as the webcam does work, but just not the software.

 

Had this problem since last April when I upgraded to Vista x64

KachiWachi
Posts: 48,016
Topics: 251
Kudos: 1,263
Solutions: 505
Registered: ‎05-22-2006

Re: Quickcam software problem Vista x64 Ultimate

Welcome to the Logitech Community Webcam Forum G9Fan! :smileyhappy:


Please contact Logitech Support directly for assistance with this issue.



Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Browser
G9Fan
Posts: 16
Registered: ‎02-28-2009

Re: Quickcam software problem Vista x64 Ultimate

Yeah, I have, when the problem first occured, to say the least, I am still waiting on their reply:smileymad:
KachiWachi
Posts: 48,016
Topics: 251
Kudos: 1,263
Solutions: 505
Registered: ‎05-22-2006

Re: Quickcam software problem Vista x64 Ultimate

OK.


Please report back in with your progress and updated status when you can.



Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Browser
G9Fan
Posts: 16
Registered: ‎02-28-2009

Re: Quickcam software problem Vista x64 Ultimate

But I did email in April, but no reply from them, since
KachiWachi
Posts: 48,016
Topics: 251
Kudos: 1,263
Solutions: 505
Registered: ‎05-22-2006

Re: Quickcam software problem Vista x64 Ultimate

What is the 8xxxxx (or 860-xxxxxx) series number from the camera tag (FAQ #3427), or preferably... the USB\VID ID?



Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Browser
G9Fan
Posts: 16
Registered: ‎02-28-2009

Re: Quickcam software problem Vista x64 Ultimate

[ Edited ]

8613606-0000

 

This is what it says in the setapi.log

 

The location of the SetupAPI log file has been changed.
The new location is: D:\Windows\INF

Which doesn't make sense, since D: is the cd\DVD drive
Message Edited by G9Fan on 02-28-2009 10:59 AM
KachiWachi
Posts: 48,016
Topics: 251
Kudos: 1,263
Solutions: 505
Registered: ‎05-22-2006

Re: Quickcam software problem Vista x64 Ultimate

P/N: 861306
M/N: V-UAX16
USB\VID_046D&PID_08CE ; Zinc2 - Pro 5000 (UVC)
QuickCam 10.x/11.x


Does this issue occur when QuickCam 11.9.0.1263 is installed?



Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Browser
G9Fan
Posts: 16
Registered: ‎02-28-2009

Re: Quickcam software problem Vista x64 Ultimate

It must of done, since 11.80.1065.0 is the an update
Logi Browser
G9Fan
Posts: 16
Registered: ‎02-28-2009

Re: Quickcam software problem Vista x64 Ultimate

ah, right, I will do something with the permission of the windows folder, and re-install Quickcam, I will let you know if it has solved the problem or not