Reply
Logi Nu
friendlyphil
Posts: 4
Registered: ‎12-26-2010

Won't recognize my webcam! (Windows 7 64-bit)

[ Edited ]

I am running Windows7 64-bit.  I have downloaded and installed (several times) the proper software from Logitech.  When I plug in the QuickCam Express camera, sometimes the computer just ignores it.  Sometimes Windows attempts to install it, but tells me it can't find the driver.  The Logitech software tells me no webcam is connected.  I know the camera works, because I have used it on another computer, running XP.  What should I do?  

KachiWachi
Posts: 48,085
Topics: 251
Kudos: 1,293
Solutions: 505
Registered: ‎05-22-2006
Country: null

Re: Won't recognize my webcam! (Windows 7 64-bit)

Welcome to the Logitech Community Webcam Forum friendlyphil! :smileyhappy:


What is the 860-xxxxxx (or 8xxxxx) series number from the camera's identification tag (FAQ #3427), or preferably... the USB\VID ID?



Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., RightNow® Technologies, Inc., or Salesforce.com, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing LIMITED "general" troubleshooting assistance in the public forums at this time.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Nu
friendlyphil
Posts: 4
Registered: ‎12-26-2010

Re: Won't recognize my webcam! (Windows 7 64-bit)

The UPC code has been removed from the box (I bought it used).  But it appears to be an older product as the box says it is compatible with Windows2000 and Windows ME.  But as for a number, I cannot find one anywhere.  The box just calls it a QuickCam Express, with a manually-focused camera on a triangular base with a button on the top that appears to do nothing with pressed.  

KachiWachi
Posts: 48,085
Topics: 251
Kudos: 1,293
Solutions: 505
Registered: ‎05-22-2006
Country: null

Re: Won't recognize my webcam! (Windows 7 64-bit)

http://www.quickcamteam.net/documentation/faq/how-do-i-find-the-vendor-and-product-id-of-my-camera



Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., RightNow® Technologies, Inc., or Salesforce.com, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing LIMITED "general" troubleshooting assistance in the public forums at this time.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Nu
friendlyphil
Posts: 4
Registered: ‎12-26-2010

Re: Won't recognize my webcam! (Windows 7 64-bit)

Here's what I got:

 

USB\VID_046D&PID_0870\5&2107F3B7&0&1

 

KachiWachi
Posts: 48,085
Topics: 251
Kudos: 1,293
Solutions: 505
Registered: ‎05-22-2006
Country: null

Re: Won't recognize my webcam! (Windows 7 64-bit)

Unfortunately, this camera is not supported on Windows 7 64-bit. :smileysad:



Thanks.


(Ref: FAQ #13985, FAQ #12712, and FAQ #3428)


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., RightNow® Technologies, Inc., or Salesforce.com, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing LIMITED "general" troubleshooting assistance in the public forums at this time.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS
Logi Nu
friendlyphil
Posts: 4
Registered: ‎12-26-2010

Re: Won't recognize my webcam! (Windows 7 64-bit)

Okay, thanks for the help!

KachiWachi
Posts: 48,085
Topics: 251
Kudos: 1,293
Solutions: 505
Registered: ‎05-22-2006
Country: null

Re: Won't recognize my webcam! (Windows 7 64-bit)

NP.



Thanks.


KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)
(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., RightNow® Technologies, Inc., or Salesforce.com, Inc.)
  Have you checked your Logitech Forums Private Messages today?  

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.


* Please note that I am currently providing LIMITED "general" troubleshooting assistance in the public forums at this time.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues?     "Everything Macintosh"
How to make your Logitech camera work in an IM                     Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS