problem installing quickcam for notebook deluxe V-UAV35

gonzaign · ‎10-06-2010

hello all, i have the following webcam in my hands

m/n : V-UAV35

p/n: 861200-0000

PID: CE54708

OS: Windows xp professional version sp3

i have already tried with a couple of drivers like

quickcam 11.1.0.2030 and with the one fm logitech webpage for mn V-UBG35

i will really appreciate to receive some advise, i really need to install this camera....

tks very much

brgds

KachiWachi · ‎05-22-2006

Welcome to the Logitech Community Webcam Forum gonzaign!

Please try reinstalling QuickCam 11.1.0.2030 "clean".

Thanks.

KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)

(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS

gonzaign · ‎10-06-2010

thanks yr prompt reply, but still is not being recognized by windows xp.

just to mention, when i plug the camera the green light is on. but still not recognized by windows or the installation driver system

rgds

KachiWachi · ‎05-22-2006

Please provide a copy of the setupapi.log for evaluation... per the specific instructions mentioned.

Thanks.

KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)

(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS

gonzaign · ‎10-06-2010

dear friend,

sorry for such late reply. hope you can see my setupapi.log from here:

thank you

KachiWachi · ‎05-22-2006

As a troubleshooting step, please try installing the camera on another PC.

Thanks.

KachiWachi - Webcam Forum Guru (2002), Logi Legend (2007), Distinguished Logi Legend (2010), QuickCam® Team Forums (2007)

(I am not affiliated with Logitech®, Inc., Lithium™ Technologies, Inc., or RightNow® Technologies, Inc.)

If you are looking for official Logitech Customer / Technical Support, please >> CLICK HERE <<

In order to help keep the forum content "fresh", please do not post a reply to any thread that is over six (6) months old.

* Please note that I am currently providing "general" troubleshooting assistance in the public forums once 24 hours have passed.
* However, if I am interested in your issue, and for all "advanced" issues, I will be sending you a Private Message before then.
* Thanks.

* PS - If one of my replies has adequately addressed your issue, please click on the "Accept as Solution" and "Give Kudos" buttons, so that this information can benefit others.

New to Webcams? START HERE!

Logitech Webcam Software 2.x (a.k.a. QuickCam 13.x) - Issues and Solutions
Logitech Webcam Software 1.00.1280 / 1.10.1113 (a.k.a. QuickCam 12.x) - Issues and Solutions
QuickCam 11.0.0.1218 / 11.1.0.2030 / 11.5.0.1169 / 11.8.0.1065 / 11.9.0.1263 - Issues and Solutions

Is your problem one of these older, common, known, or repeat issues? "Everything Macintosh"
How to make your Logitech camera work in an IM Are you looking for (older) software?
Why your older Logitech camera *may* not be supported on Windows Vista, 7, 8, and/or on a 64-bit OS

Webcams